Magnetic Fabric Displays & Stand Kits

Printed fabric panels snap straight onto the frame by hand, so one person can put up a portable stand and a small team can raise a 6m x 6m wall.

Talk to an expert
800+ Products available
50,000+ Orders
30+ Countries
22+ Years experience
Magnetic Fabric Displays & Stand Kits
5x3m Magnetic Fabric Booth Wall with 7 Panels

5x3m Magnetic Fabric Booth Wall with 7 Panels

¥323,400
4x4m Magnetic Fabric Booth Wall with 9 Mixed Panels

4x4m Magnetic Fabric Booth Wall with 9 Mixed Panels

¥359,600
4x4m Magnetic Fabric Booth Wall with 16 Panels

4x4m Magnetic Fabric Booth Wall with 16 Panels

¥633,200
4x4m Magnetic Fabric Booth Wall with 4 Panels

4x4m Magnetic Fabric Booth Wall with 4 Panels

¥207,400
4x3m Magnetic Fabric Booth Wall with Curved Panel Options

4x3m Magnetic Fabric Booth Wall with Curved Panel Options

¥263,600
4x3m Magnetic Fabric Booth Wall with 8 Panels

4x3m Magnetic Fabric Booth Wall with 8 Panels

¥327,800
3x3m Magnetic Fabric Booth Wall with Curved & Straight Panels

3x3m Magnetic Fabric Booth Wall with Curved & Straight Panels

¥292,900
3x3m Magnetic Fabric Booth Wall with 8 Panels

3x3m Magnetic Fabric Booth Wall with 8 Panels

¥298,200

Not sure which display fits your booth?

Get a free 2D mockup with your artwork — see exactly how it looks before you order. 7,000+ happy exhibitors.

Talk to an expert
3x3m Magnetic Fabric Booth Wall with Modular Panels

3x3m Magnetic Fabric Booth Wall with Modular Panels

¥345,900
3x3m Magnetic Fabric Booth Wall with 6 Straight Panels

3x3m Magnetic Fabric Booth Wall with 6 Straight Panels

¥274,000
3x3m Magnetic Fabric Backwall Kit with Full-Width Graphic

3x3m Magnetic Fabric Backwall Kit with Full-Width Graphic

¥183,500
2x2m Magnetic Fabric Straight Backwall Display

2x2m Magnetic Fabric Straight Backwall Display

¥159,100
2x2m Magnetic Fabric Backwall with Full-Face Graphic

2x2m Magnetic Fabric Backwall with Full-Face Graphic

¥152,900
2x2m Magnetic Fabric Booth Wall with 5 Straight Panels

2x2m Magnetic Fabric Booth Wall with 5 Straight Panels

¥171,600
2x2m Magnetic Fabric Booth Wall with 3 Curved Panels

2x2m Magnetic Fabric Booth Wall with 3 Curved Panels

¥122,400
2x2m Magnetic Fabric Booth Wall with 4 Curved Panels

2x2m Magnetic Fabric Booth Wall with 4 Curved Panels

¥161,000
800+ Products available
50,000+ Orders
30+ Countries
22+ Years experience

Related Collections

Exhibition Transit & Carry Cases
Exhibition Transit & Carry Cases
Literature Holders & Tablet Stands
Literature Holders & Tablet Stands
Exhibition Display Accessories & Add-Ons
Exhibition Display Accessories & Add-Ons
Interlocking Exhibition Flooring
Interlocking Exhibition Flooring
Fabric Roller Banner Stands
Fabric Roller Banner Stands
Custom Exhibition Counters, Lecterns & Podiums
Custom Exhibition Counters, Lecterns & Podiums

Not sure which display fits your booth?

Get a free 2D mockup with your artwork — see exactly how it looks before you order. 7,000+ happy exhibitors.
Talk to an expert
Not sure which display fits your booth?

What our customers say

4.9from 7,200+ reviews
A great process from start to finish, good communication and the product arrived promptly and we are very happy with our banners! Thank you
Mikey WrightEvents Director, BluePeak
Amazing value, amazing product very accommodating too. Would recommend to anyone and everyone.
Josh NevilleEvents Director, BluePeak
Always a pleasure to work with Backdropsource! We've ordered several event banners through the company; they are always very helpful, fast, and the banners themselves are of great quality and easy to set up.
Miles StreetFounder, Trendline Co.
I ordered a teardrop banner for my Choir. Quick and efficient customer service, speedy delivery and top quality product!
ELAINE WEBBBrand Manager, NovaTech

Frequently Asked Questions

How do the magnets actually hold the graphic in place? +
Magnets are set into the frame profile and the printed fabric panel carries a matching magnetic edge, so the panel is offered up and snaps into position under its own attraction. There is nothing to thread, no hook-and-loop tape to peel apart and no tools involved, which is what makes these systems quick for a team that changes stand layouts often. If a panel sits proud at one point, lift it clear and reseat it rather than pressing it down, because the magnets self-align only when the panel is placed cleanly.
Straight, curved or rampant: which portable magnetic stand suits a small space? +
A Portable Magnetic Straight Fabric Stand gives the largest usable graphic area for its footprint and is the safe choice when you are backing onto a wall. The Curved version pulls the ends forward slightly, which frames your space and draws people in from the aisle, at the cost of a little graphic width. The Rampant profile steps in height, so it suits a position where you want presence at one end and a lower shoulder at the other, typically beside a counter or a screen. In a 3m shell scheme, curved usually looks more considered.
How long does a large magnetic system take to build, and how many people? +
A single portable magnetic stand is a one-person job. A full system covering 4m x 4m, 5m x 5m or 6m x 6m is realistically a two-person build, mainly because the frame sections need holding square while they are joined rather than because anything is difficult. The magnetic panels go on last and are by far the fastest part of the process. Build the entire frame, check it is square and level, then apply graphics; fitting panels as you go makes squaring the frame considerably harder.
Can I keep the frame and reprint only the panels? +
Yes, and it is the strongest financial argument for the system. The aluminium frame is the durable element and the fabric is the part that dates, so a rebrand, a new product or a different show message costs panels rather than a whole stand. Keep the frame configuration consistent between events and label each panel on the reverse with its position, because a large magnetic wall is only fast to build if nobody is solving a jigsaw on the hall floor. Panels fold flat between shows.
Are the magnets a problem for phones, cards or medical devices? +
The magnets are held inside the extrusion and are strong enough to hold fabric, not to damage electronics. Phones, contactless cards and laptops are unaffected by incidental proximity in normal use. The genuine cautions are two: anyone with an implanted medical device such as a pacemaker should avoid handling the magnetic edges closely, and loose panels stacked face to face can snap together hard enough to catch fingers. Unpack and handle panels one at a time rather than lifting a stack.
Can I start with one wall and expand the system later? +
Yes, provided you stay within the same frame family. A straight magnetic stand bought for a small event can become one wall of a larger configuration later, and that is how most exhibitors build up over a few seasons. What you should decide now is the maximum size you are likely to need, because a graphic designed as a single wall rarely stretches gracefully across a three-sided stand. Plan the artwork in sections from the outset and expansion stays straightforward.
How should artwork be supplied for a multi-panel magnetic wall? +
Supply artwork per panel where possible and tell us the panel layout so the seams can be positioned deliberately. A seam falling through a face, a logo or a key product shot is the most common regret on multi-panel walls, whereas a seam falling through open background is invisible at normal viewing distance. Free artwork assistance and free 2D mockups are included so you can see exactly where the joins land before printing. Send files to support@backdropsource.co.uk.
How is a large magnetic system delivered and stored between events? +
Frames and panels ship with free UK delivery and carry a 1-year warranty. Larger systems arrive as several packages, so check the count against the paperwork on delivery rather than at the venue, because a missing frame section is recoverable weeks out and fatal on build day. Fold panels with the print facing inwards and store frame sections so the magnetic edges are not resting against loose metalwork. Halls like Manchester Central run tight build slots, so unpack in build order instead of emptying every case at once.